5 Simple Practices to Terminate Wires into Electrical Panels

electrical panel

There are various methods for picking up the right technique for entering the cable into an electric panel. If you are searching for different techniques to push electric wires inside an electric panel, then you can take the help of professional electricians like electrician Northern Beaches or use one of the following techniques. Here, in this article, we have listed down a few techniques that can be used for cable entry.

1. Cable Gland

The cable gland is one of the media to terminate the electric cables into an electric box. It is simple to use and also available in various sizes, material and required certification like ATEX. The cable gland is one of the pocket-friendly solutions available in the market.

But, cable glands have some disadvantages. It is difficult as well as time-consuming to do various connections or disconnections by using cable glands. This is so because electric cables are terminated directly into the cable gland which is placed inside the electric panel. Along with this, the pre-cut holes on this gland plate are not at all reversible. The cable gland offers little flexibility, which means modifications are not allowed when the task is completed.

The name of this component itself reveals that it is a rugged device and lets you do simple and fast connections or disconnections. For doing all these connections, the electrical cables are prewired into the base of the connector. The connector is mounted over the panel and field cables are placed inside this panel inside the connector hood.

After that, the connector hood is plugged at the base of the electric panel. This connector let you make the connections up to IP 69K. If you want to know the right connector to terminate wires into electrical panels at you home, then take help of professional electrician like electrician at Northern Beaches Sydney.

2. Heavy-duty connector

This type of connector is specifically used for portable applications as heavy-duty connectors let you do easy connections and disconnections. But, these types of connectors are more expensive as compare to cable glands. This type of connector reduces time consumption and also need less manpower for making the electrical connections.

Less time for electrical connections means if you are using this type of connector, then it will take less time fo installing and commissioning process. Moreover, this type of connector also reduces the number of errors while installing the connector and making connections at the site.

These types of connectors are made up of aluminum. But some connectors also available in plastic. The plastic Heavy-duty connectors are used to support applications that do not need metal housings. These plastic-type connectors can reduce your expenditure by up to 30%. In addition to this, by using a dual entry cable gland, you can easily accomplish the onsite installation as it is quite flexible.

These connectors are used for major industrial electrical applications. If any fault takes place in this connector, then call a skilled electrician who is ready to serve anytime like Northern Beaches  Emergency electricians.

3. Cable Entry System

The type of connector is just like cable gland connectors. But, these connectors help in arranging cables systematically and efficiently inside the electrical panel. If you manage the cables properly, the gland plate can be utilized properly and efficiently. The Cable entry system works in a modular fashion and by using this you can easily move the cable sleeves to make an electric connection without facing many problems.

The sleeves with slots let you install sensor-actuator cabling.  To install this type of connector, you need to call a reliable sydney electrician. The holes in the case entry system us just like that of heavy-duty connectors. Therefore, you can easily interchange them. But, the CES connector is not a pluggable connector. Therefore, it is not optimum for those applications where you need to form frequent connections.

4. CES Multigate

This connector is somewhat similar to the Cable entry system. This connector lets you easily manage the cabling connections. But, multigate has a predefined cable entry system. In this connect, all the cable entry section are designed in a cone-shape that let you easily accommodate a wide range of cables.

This type of connector is perfect for electric panels where you use electric cables with predefined specifications. This connects offer good cable management system, therefore, you can easily isolate faulty lines.

5. Service Interface

The service interface connector will let you do the maintenance of electric cables, servicing and fault diagnosis simple and easier than ever. The front plate is available in various types of configurations D-SUB, RJ45 and USB. These configurations will let you do make various combinations.

The mounting frame in this connector offers up to IP 65 protection along with the locking system. This mechanism offers extra security. Also, it let you do any reprogramming or reconfiguration easily without opening the electric panel.


Leave a Reply